Product Categories
Store Links

Innokin Coolfire 1 Mod

4 product stars
£34.99 £29.99

Innokin Coolfire 1 Mod Summary

Innokin Cool fire 1 Mod Set

New and very sleek from Innokin is this  stunning 18350 mod starter kit. (please click on the smaller pictures to enlarge)
The Innokin Cool Fire 1 Kit includes the New Iclear 30B Dual Coil Clearomiser in green, which matches very well with the Stainless Steel mod. (extension tubes 18650 size are available here )

Cool Fire Features:

  • Supports 18350 batteries – maximum current output is more than 5000mA.
  • Rated power of 8.5W, which is perfectly suitable for 2.0 ohm iClear dual coil clearomizers.
  • Reverse Battery Protection Circuit.
  • Built in 7A fuse for protection and stability.
  • Short Circuit Protection.
  • ON/OFF battery switch.
  • LED Battery Power Display.
  • Low Voltage Warning.
  • Overtime Vaping Warning (10 second switch cutoff).
  • Battery safety protection (Vent holes).
  • High compatibility 510 connector:Will fit iClear16, iClear30, and iClear30S dual coil clearomizers, as well as standard 510 accessories.

The Kit includes the new Iclear 30B Dual Coil Clearomiser which is a bottom replaceable coil clearomiser. Made from Stainless steel with a polycarbonate tank and a fitted 2.1 ohm atomiser COIL head. The 30B also has a non rotatable 510 mouthpiece (Drip tip) which you can change.

TIP: The iclear 30 B tanks are better suited to thicker eliquids with a ratio of at least 50pg/50vg or more vg content

The starter kit contains

1 x Cool Fire 1 mod
1 x 30B Dual Coil Clearomiser with non rotatable mouthpiece. (green tank)
1 x Fitted atomiser 2.1 ohm inside the clearomiser
1 x Acrylic box
1 x User manual
Batteries and Chargers are not included but are available in the links  below

Batteries and charger are not included and will have to be purchased separately.
AW or IMR EFEST 18350 Batteries recommended
IMR efest 18350 Batteries are here
Chargers are here here and here 
COOL FIRE 18650 Extention tubes are here
postage is £4.10 1st class recorded delivery within the UK

Product out of stock

Notify me when product is back in stock
Related Products
Empty Squeezy Bottle with..
Empty Squeezy Bottle with..
Empty Squeezy bottle with blunt needle top for filling e-liquids into tanks and clearomizers The bottles are a good quality ,squeezy flexible plastic...
Innokin iClear 30B Clearo..
Innokin iClear 30B Clearo..
Innokin  iClear 30B  Dual coil clearomizer - in stock Innokin IClear 30B Clearomizer tank - New design released  Removable drip tip...
Innokin iClear 30B X.I Re..
Innokin iClear 30B X.I Re..
Replacement Coils for Innokin  iClear 30B and innokin iclear glass X.I Dual coil clearomizer tanks Stock up on spare heads - Option to purchase:...
EFEST IMR Batteries 18350..
EFEST IMR Batteries 18350..
EFEST  IMR 18350 3.7V LI-MN High Drain Battery - Ideal battery for the Vamo V2 Mod (unprotected) Rechargeable Battery direct from Efest Company....
NITECORE Intelligent i2 B..
NITECORE Intelligent i2 B..
Nitecore intelligent i2 LI-ION Charger   in stock now Charges vamo v2 batteries 18650 18350 Compatible with nearly all types of rechargeable...
COOL FIRE 1 Adapter 18650
COOL FIRE 1 Adapter 18650
Cool Fire 1 adapter 18650 The adapter tube is an extention tube which when attached to the cool fire 1 mod, enables you to use larger 18650 sized...
Customer Reviews
4 review(s) posted (write review)

5 product stars
Coolfire 1 - Michelle - 02/05/2014
Ordered this at the weekend , very good delivery & service , great product.

5 product stars
perfect - Christopher O´Malley - 07/04/2014
Just picked my cool fire 1 from post office because I was out yesterday and mist the post . was not sure if I had done the right thing in buying this . but it is absolutely great . right on the spot that I vape at . I bought the 18650 adapter at same time a must have I think . I am an I clear 16 fan so tried that on it and it was just so good . not tried the I clear 30b yet but if you in any doubt about this just get it you wwon't regret it . for the price you just cannot go wrong . as usual the device was spot on came next day just like everything I buy from here. Only place I biy from now . now what to get next lol .

4 product stars
Innokin Cool Fire 1 (Part 2) - Lou Davey - 02/24/2014
Although not stated on the packaging info the unit is a standard three clicks on and off of which the fire button has a positive feel.Three coloured lights in the fire button indicate battery condition being green (good health), yellow (weak battery) and red (time for a new battery!) and after two weeks of using this mod I have found that I get roughly half a day battery life so spares are kept handy.After a little more research of other advanced mods particularly VW/VV types my experience has developed a little further and the maximum wattage of this device may not be enough for the more hardened and experienced vaper’s, as the Cool Fire 1 will only allow a maximum of 8.5 watts output which provides a cooler vape experience. Personally I have enjoyed vaping on this as a next step up from generation 2 style e-cigs such as the Ego-T.Although at this time I have not been able to get along with the included iclear 30b clearomiser (maybe another review), I have enjoyed however using this mod with my CE4’s and recently purchased Protank 2.I would have liked this mod to have been able to adapt to a larger battery such as the 18500 or 18650 by way of an extension tube but guess that's why the SVD is an alternative next step up which I have now ordered.All in all I am pleased with the Cool Fire 1 along with the EFEST batteries and Nitecore charger purchased from UK E-Cig Cabin. I have since purchased other items from them who have supplied me with prompt service and delive

4 product stars
Innokin Cool Fire 1 - Lou Davey - 02/24/2014
Well after receiving this product the first impressions were good. This Cool Fire 1 kit is packaged in a clear Perspex type case along with an iclear 30b dual coil clearomiser (2.1ohm). There are no separate user instructions, but is provided with the main features on the underside of the case.I originally decided to try e-cigs to get me off the analogues which I have smoked for over 35 years and this purchase is my next step up from an Ego-T after trialling various clearomiser’s such as the CE4’s etc., and I wanted something a bit more robust in the hand but small enough to use while my lovely wife drags me around the shops etc. Of course this meant I would also have to invest in the required batteries and charger which were the EFEST IMR 18350 800mah and NITECORE Intelligent i4 battery charger also purchased from UK ECig Cabin.This is a great looking mod made of stainless steel with brass contacts measuring approx 80mmx21mm in diameter and with the iclear 30b fitted measures 145mm in total length.It has a removable top ring with air vent holes drilled into two of the six recessed dimples which help to accommodate flush fitting clearomisers such as the iclear 30b and other 510 accessories and aids access of the threads for cleaning etc. It has a spring loaded 510 pin which can accommodate both kanger and evod type tanks. The threading is smooth on both the top ring and end cap and the aesthetics of the mod are very pleasing. Although not stated on the packaging info

Share |